Features ColorProof 5.12

• PSO Coated NPscreen (43L)
• PSO Uncoated NPscreen (44L)
• PSO INP Paper (48L)​

• SC Paper (40L)
• PSO MFC Paper (41L)
• PSO LWC Improved (45L)
• PSO LWC Standard (46L)
• PSO Uncoated ISO12647 (47L)​

• PSR MFv2 M1
• PSR LWCplusV2 M0
• PSR LWCplusV2 M1
• PSR LWCv2 M0
• PSR LWCv2 M1
• PSR SCplusV2 M0
• PSR SCplusV2 M1
• PSR SCv2 M0
• PSR SCv2 M1

• SC Paper (40L)
• PSO INP Paper (48L)
• PSO SNP Paper (42L)

• PSR MFv2 M1
• PSR LWCplusV2 M1
• PSR LWCv2 M1
• PSR SCplusV2 M1
• PSR SCv2 M1

• PSR LWCv2 M0
• PSR LWCplusV2 M0
• PSR SCplusV2 M0
• PSR SCv2 M0

• ISO Uncoated Yellowish (30L)​
• PSO LWC Improved (45L)​
• PSO MFC Paper (41L)​
• PSO SC-B Paper v3 (54)
• ISO Newspaper (26 v4)
• WAN-IFRA Newspaper (26 v5)​

You will be able to use X-Rite i1Pro 3 and i1iO Generation 3 Table to calibrate your printer or create your own custom proof profile. The following tools for use with GMG ColorProof support it:

• GMG CaliWizard
• GMG SpotColor Editor
• GMG ProfileEditor

Please refer to the manufacturer's website to learn more about the new device:

https://www.xrite.com/page/i1-pro-3-family

• GRACoL 2013 Uncoated (CRPC 3)
• PSO Uncoated ISO12647 (47L)
• PSO Uncoated v3 (52)

• SC-P7000/9000 10c Violet to SC-Px500 11c
• SC-P7000/9000 10c LLK to SC-Px500 11c
• SC-P6000/8000 8c to SC-Px500 11c

In GMG ProfileEditor, on the Tools menu, click Convert Profile. Then select the desired profile conversion from the list.

• JetComp 8410 10pt C1S Board Stock
• JetComp 8502 Clear Poly Film
• JetComp 8508 Metallized Polypropylene

For the above mentioned media, GMG ColorProof offers a ready-to-use calibration set. With the help of the Calibration Creation Wizard, you can use virtually any substrate supported by the printer.

If you already used the Epson SureColor SC-S80600 before this version, please note the following: The new calibration sets are identical with the ones provided by the GMG team for import before this release. During the upgrade, the imported calibration sets will be replaced with the new ones automatically and marked as "GMG". Custom calibration sets (created by the Calibration Creation Wizard) will be left unchanged.

GMG ProofMedia premium semiMatte 250:

• PSO LWC Standard (46L)
• PSO Uncoated ISO12647 (47L)

GMG ProofPaper matte 140:

• ISO Newspaper (26 v4)
• ISO Uncoated Yellowish (30L)
• PSO Uncoated ISO12647 (47L)
• PSO Uncoated v3 (52)
• GRACoL 2013 Uncoated (CRPC 3)

• PSR MFv2 M1
• PSR LWCv2 M1
• PSR SCplusV2 M1
• PSR SCv2 M1

Please follow the link to find out more about the PSR standard update: http://www.eci.org/en/colourstandards/gravure

The following proof standards are now supported for GMG ProofMedia premium semiMatte 250 and GMG ProofMedia premium OBA semiMatte 250:

• Adobe RGB
• ECIRGBv2
• sRGB
• GRACoL 2013 Coated (CRPC 6)
• GRACoL 2013 Uncoated (CRPC 3)

If you choose to install a new software patch automatically, new proof standards (and the corresponding profiles) and spot color sets can be downloaded as well during that process from now on.

When new proof standards are available for one of your installed printer-media combinations, you will be notified by an opening window after the installation. There you can see the new proof standards. After selecting what you want to activate, the chosen proof standards will be automatically downloaded and added to the database. Proof standards you do not select now can also be added any time later in the Database view > Proofing Conditions tabbed page. Please note that an active internet connection is required for later adding as well.

New spot color sets will always be added to the database, i. e. will be ready for use immediately.

GMG ColorProof 5.12 supports contone proofing, including Calibration Sets and Spot Color Sets, on the following media:

• GMG ProofMedia premium semiMatte 250
• GMG ProofMedia premium gloss 250
• GMG ProofMedia premium OBA semiMatte 250
• GMG ProofMedia studio OBA semiMatte 200
• GMG ProofPaper semiMatte light

The following proof standards are supported for all above-mentioned media:

• PSO Coated v3 (51L)
• ISO Coated v2 (39L)

The following proof standard is supported for the above-mentioned OBA media:

• PSO Uncoated v3 (52L)

Support for other media and proof standards will be provided later.

Please refer to the manufacturer's website to learn more about the new printer:

https://epson.com/For-Work/Printers/Large-Format/SureColor-P7570-24%22-Wide-Format-Inkjet-Printer/p/SCP7570SE