What's new in ColorProof 5.15

New in version 5.15.0.176 - June 11, 2024
This version provides higher stability and fixes several bugs. We recommend you to always install the latest GMG ColorProof version to benefit from all improvements.

The most important bugfixes:

• PDF processing failure
  In version 5.15.0.148, some PDF files failed to start processing. Despite being valid, they remained in the 'In Hotfolder' status.
• Wrong ink order for PDF+ jobs
  When processing specific PDF files from Esko ArtPro+, the ink sequence defined in GMG OpenColor was ignored .
• Misleading display: 'Pending Profiles Sync‘
  The hyperlink in the lower status bar, leading to the overview of pending GMG OpenColor profiles, was sometimes highlighted even though no sync was pending.
• Missing preview for XML jobs
  Jobs generated by an XML Job Ticket Hotfolder did not display a preview of *.ai files.

New in version 5.15.0.148 - May 2, 2024
This version provides higher stability and fixes several bugs. We recommend you to always install the latest GMG ColorProof version to benefit from all improvements.

The most important bugfixes:

• Failed pairing with GMG ColorProof GO
  At times, authentication would time out during the pairing attempt with GMG ColorProof GO, and the pairing process was terminated with an error message.

New in version 5.15.0.123  - March 25, 2024
This version provides higher stability and fixes several bugs. We recommend you to always install the latest GMG ColorProof version to benefit from all improvements.

The most important bugfixes:

• Stuck job processing
  Occasionally, jobs became stuck in the 'ready' status or were canceled with an error message.
  Error message: "Unexpected end of printing."
• Failed imposition proofer jobs
  When dropping multiple PDF files into the imposition proofer hotfolder, some of them failed to process. In the spooler printer queue, 'N/A' was displayed instead of their page number.
• Channel order mismatch in manual job manager
  After selecting 'From OpenColor Proofstandard' in the manual job manager, the displayed channel sequence was sometimes wrong. Although the profile was calculated and printed correctly, the user interface didn't consistently update to reflect these changes.
• Missing or wrong localization entries
  Several translations were added or corrected.
  
  

New in version 5.15.0.72 - January 18, 2024

This version provides higher stability and fixes several bugs. We recommend you to always install the latest GMG ColorProof version to benefit from all improvements.

The most important bugfixes:

• Application crash
  Periodically, GMG ColorProof stopped processing jobs and froze.
• Error message: "Unexpected end of the printing."
• Failing hotfolder / workflow import
  Importing hotfolders or workflows occasionally resulted in an error.
  Error message: "Import/export error: File could not be loaded."

New in version 5.15.0.54 - December 18, 2023

This version provides higher stability and fixes several bugs. We recommend you to always install the latest GMG ColorProof version to benefit from all improvements.

The most important bugfixes:

• GMG Remote CaliWizard issues
  It was not possible to calibrate with GMG Remote CaliWizard 5.15.0.32, an error message was displayed.
  Error message: "Object reference not set to an instance of an object."
  
• Wrong print sequence for GMG OpenColor jobs
  In manual jobs with dynamic GMG OpenColor proof standards, the drop-down list could not be set to 'From OpenColor ProofStandard'. It automatically switched back to 'From Input File (PDF)'.
• Failed reversion to dongle licensing
  On some systems, it was not possible to switch back from online licensing to dongle Licensing.

New in version 5.15.0.40 - November 28, 2023

This version provides higher stability and fixes several bugs. We recommend you to always install the latest GMG ColorProof version to benefit from all improvements.

The most important bugfixes:

• Crash on 10c+ GMG OpenColor jobs
  If a PDF contained objects with the color space 'separation', jobs with ten or more channels and 'Use latest MXN Profiling' enabled were not printed. The jobs remained in the 'processing' status or displayed an error; GMG ColorProof froze and required a restart.
  Error message: "Failed to initialize printer."
• 'Label to Chain' error for MX4 calibrations
  When using or creating MX4 calibrations with an Epson driver, an error message was shown
  Error message: "Not Implemented - Label to Chain"

New in version 5.15 | November 15, 2023

Proof with the new HP DesignJet Z9⁺ PostScript® series

GMG ColorProof supports the new printers 'HP DesignJet Z9⁺ 24-in PostScript®' and 'DesignJet Z9⁺ 44-in PostScript®' (without dual roll). With 5 print heads for up to 10 colors, the printers allows for a very large gamut. Both models are equipped with an X-Rite i1 measuring device and thus can be used with GMG ProofControl. 

Keep up with the latest PDF technology

The RIP integrated in GMG ColorProof is based on the Adobe PDF Print Engine (APPE). We have updated the engine to the latest version 6.1 to ensure compatibility with the most advanced PDF technology and Adobe Creative Cloud applications. Please visit the Adobe website for further details on the Adobe Print Engine 6.1.

Embrace the convenience of our dongle-free GMG Online Licensing

The Application Service coming with this version supports the new GMG Online Licensing. Online licenses are system-based licenses that you can use on a local machine or in a virtual environment. They are very stable and don't require a dongle that could break or get lost. Learn more about our online licensing and how you can easily switch for free.

Enhance workflow with new XML job ticket options

Automation as flexible as you are: quickly adjust your workflow to sudden changes in your daily business by prioritizing upcoming jobs via XML job ticket. For jobs using GMG OpenColor standards, you can also add a job order. Apropos standards: if different versions of a proof standard are available, you can now specify exactly which version should be used for a job. Another improvement streamlines spot color handling: instead of creating a single gradation file for each color, you can now use just one gradation file for an entire library. 

Solve problems faster with advanced job ticket reports

Job ticket reports now also show detailed information about warnings and error messages, so you can solve problems faster and easier. Please find further information about job ticket reports under the following link: Job Ticket Report

Resolved issues

This version provides higher stability and fixes several bugs. We recommend you to always install the latest GMG ColorProof version to benefit from all improvements.

The most important bugfixes:

• Slow connection to GMG OpenColor
  A performance issue occurred when manually loading colors from GMG OpenColor 3.0 projects into a GMG ColorProof job; the list was displayed too slowly. The cause was at GMG OpenColor and has been resolved with Version 3.1. Please update GMG OpenColor and, if you were affected by this issue, enable the check box under the following string to enhance performance:
  Preferences > Web Service Settings > Deactivate Color Corrected Display of Lab Values in Connected Applications (Boost Performance)
• Error in connection to GMG OpenColor
  The dynamic GMG OpenColor standard downloaded into the GMG ColorProof database was, in some cases, corrupted. This resulted in GMG OpenColor inks that couldn't be displayed or jobs showing an error message. The cause was at GMG OpenColor and has been resolved with Version 3.1. Please update GMG OpenColor to fix the issue.
  Error message: "Either OpenColor profile not found or no active connection to OpenColor."
• Paper wasted by imposition proofer
  The imposition proofer did not always cut immediately after printing, which in some cases led to paper waste.
• Ignored image control strip setting
  The default image control strip settings for manual jobs were not applied when using a dynamic GMG OpenColor profile.
• Missing compatibility between Epson SureColor SC-P9500 and SC-P7500
  Jobs with 'Epson SureColor SC-P9500' settings could not be imported into systems with Epson SureColor SC-P7500, despite the printers belonging to the same series.
• Unrecognized spot color channels during remote proofing
  Jobs created through a job ticket workflow, with manual adjustments to some spot colors afterwards, were incompletely imported on the remote site. None of the spot colors were recognized on the remote site.
• Freezing license window
  Unlicensed standalone installations of GMG ColorProof 5.14 could not upload license files.