Epson SureColor SC-P7000 cannot be calibrated: Pre-lin exceeding the defined tolerances

Your Epson SureColor 7000 cannot be calibrated can the following message is displayed?
Error message: "The pre-linearization results are exceeding the defined tolerances..."

Please perform the following actions before calibrating:

• Check the expiration date of the inks and replace cartridges if needed. Please note that two power cleanings are needed to remove the old ink from the tubes.
• Please shake all the inks well. (If inks are not shaken, they can build a sediment. To increase the print quality please regularly shake the inks.)
• Print a nozzle pattern: ColorProof > Printer > Maintenance: print nozzle pattern (or on the printer display: Select TEST PRINT > NOZZLE CHECK > PRINT)
• In case of disrupted lines, please keep cleaning the print heads:
  ColorProof > Printer > Maintenance: Power clean print heads || Or clean only color pairs which need cleaning
• Automated paper feed adjustment: ColorProof > Output > Printer > Start Paper Feed Adjustment
  
• Print head alignment:
  If you are printing bidirectional, the adjustment should be done in this order:
  • Printer Menu > Head alignment > Alignment > Auto > Uni-D > Print
  • Printer Menu > Head alignment > Alignment > Auto > Bi-D all > Print

If you are printing unidirectional, start this only:

• • Printer Menu > Head alignment > Alignment > Auto > Uni-D > Print
    
    
• Before you start the calibration, you can reset it (right-mouse click):