Why is the ColorServer Client not connected?

The ColorServer Client shows the following message?
"Client is disconnected"


Please check if the defined port is correct. By default the port is 8111.

Note: the defined port must be the same in all of the below settings: 

1. ColorServer Client > Settings > Server Port
2. ColorServer Configurator > Server configuration > Web Service Port
3. ColorServer Configurator > Worker configuration > Web Service Port
4. Hotfolder Service Configurator > Einstellungen > Serverport

Hier unten sehen Sie, wie sie zu den Port-Einstellungen gelangen.

1. Open the ColorServer Client > General settings > Server Port
   
2. Start the GMG Service Controller. The controller will appear as a symbol in the task bar. Right-click on the symbol to open the ColorServer Configurator.
   
   In ColorServer Configurator > Server Configuration > Scrol down to 'Web Service Port'
    
3. Go to the next tab 'Worker Configuration'
   ColorServer Configurator > Worker configuration > Web Service Port
   
4. Open the Hotfolder Service Configurator > Settings > Serverport
   

Please check if all defined ports are the same.