How to calibrate a printer

The calibration process depends on whether your printer has an internal or external measuring device.

Calibration of a printer with an internal measuring device

1. In the top part of the main screen, select the printer you have just created to display the calibration sets available for the device.
2. Set your desired calibration set in the lower part of the window.
3. Right click on the AutoCali-Wizard symbol .
4. Wait until the fully automated calibration process is completed.
5. Close the calibration window.

Calibration of a printer with an external measuring device:

1. In the top part of the main screen, select the printer you have just created to display the calibration sets available for the device.
2. Set your desired calibration set in the lower part of the window.
3. Connect your external measuring device to your computer.
4. Right click on the CaliWizard symbol .
5. If the measuring device is not recognized and the calibration assistant does not start, in the System menu, click Used Measuring Devices and select the connected measuring device. Then please start the GMG CaliWizard again.
6. From the Available measuring devices list, select the connected measuring device.
7. Follow the instructions of the calibration assistant and click on Next until the calibration is complete.
8. Close the calibration assistant window.